Nora Lighting 3" Air Tight Line Voltage MR16 GU10 Remodel Housing
Remodel three inch housing for installation into existing sheet rock ceilings where access is only available from below the ceiling. For use in non-insulated ceilings, where insulation can be kept 3" from fixtures. Nora Lighting Line Voltage MR16 GU10 housing provides the crisp reflectance of MR16 light sources while operating on straight line voltage without transformers. New GU10 lamps are shielded and feature solid, heavy duty turn-and-lock contacts. Nora's GU10 fixture is quick to install, operates on standard incandescent dimming controls, and accepts a wide variety of high quality, adjustable finishing trims.
Minimum Clearances: Non-IC housing requires minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components
Ceiling Thickness: Housing accepts 3/8" ceiling thickness only.
Lamp Adjustment: MR16 trims have adjustment bracket providing a secure friction hold for any desired angle
Installation: High-tension, tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience
Junction Box: Contains one 3/4", two 1/2" knockouts and four Romex pryouts with strain relief
Electrical: Quick connector
Lamp: 50W 120V MR16 GU10 maximum (MR16 GU10 with 40-degree beam spread included)
0.035 white baked enamel one-piece drawn steel. Adjustable for ceiling thickness up to 1 1/4"
Porcelain GU10 socket with nickel plated copper contacts.
Width: 3 2/5"
Depth: 4 5/8"
Ceiling Opening: 3.1"
cULus Listed for Damp Location with Feed Through
cULus Wet Location (Only with designated trims)
Washington State Approved
Meets or exceeds ASTM-283 Air-Tight