300W 12V Remote Electronic Transformer
This remote electronic transformer converts standard 120 volt line-voltage to 12 volts, providing the necessary voltage for powering a MonoRail, Kable Lite, Wall MonoRail or FreeJack low-voltage lighting system. This remote electronic transformer can be used to power lamps totaling up to 300 watts. This transformer is equipped with fast-acting short circuit and overload protection that will safely turn off the system should a short occur. Once the short is removed, the unit can be reset by simply flipping the wall switch off and back on.
This transformer must be installed in a remote but accessible location (such as above the ceiling or in a closet). To simplify installation the transformer should be located no more than 20 feet from the run or power feed. The electrician will need to supply the proper gauge conductor from the transformer to the power feed location based on distance.
Input Wiring: Can be ordered to hard wire to a junction box or plug in with 16' power cord with plug. This transformer provides 1 x 300W output and must be used with a single feed canopy or other power feed option (sold separately). 12V output transformers require the use of 12V lamps.
3.5" W x 2" H x 8.5" L
If in stock, item ships in 3 to 7 business days.
700AT300EL: 120V IN/12V OUT
700AT30ELP: 120V IN/12V OUT PLUG-IN
This item is final sale and not eligible for return.